You can set an area for motion detection PIR function by clicking on:
To configure PIR Alarm, see "Section 3.6.2-PIR "
DETERRENCE
The deterrence function can be used to configure some actions to deter and report abnormal behaviour detected by the camera.
This fuction is active from firmware version 8.2.2 and further.
INTELLIGENT
The optional intelligent functions include PID (Perimeter Intrusion Detection), LCD (Line Crossing Detection), SOD
(Stationary Object Detection), PD (Pedestrian Detection), FD (Face Detection) and CC (Cross Counting).
For more information on the use and settings of intelligent video analysis functions, see the URMET website on
http://www.urmet.com
where it is also possible to check series or part numbers, availability of related additional material,
such as DS1093-576 Addendum Intelligent Video Analysis and any firmware updates containing improvements made to
intelligent video analysis algorithms.
The following table summarizes the possible scenarios for using intelligent algorithms for analogue or IP cameras. The IP
camera functions, especially FD depend on the camera model.
DS1097-024C
34