•
Default: This can be used to restore the default alert settings.
•
Apply to save the changes.
EXCEPTION
This menu can be used to set the event type (e.g. full HDD, disk error, video loss) for that you want to be alerted by the
HVR.
Here is a brief description:
•
Channel: this is used to select the channel with that the Intelligent detection function is associated.
o
No Space on Disk: When an HDD is full.
o
Disk Error: When the HDD is not correctly detected.
o
Video Loss: If a camera is not connected correctly.
•
Switch: Check the box to enable event monitoring.
•
Buzzer: This can be used to set the buzzer time when an event occurs (Off/10s/20s/40s/60s). To exclude the buzzer,
select OFF.
•
Latch Time: This is an optional function. This can be used to determine the time of the external alarm device sound
signal (10s, 20s, 40s, 60s) if the HVR supports such a connection.
•
Show Message: Check the box to display a message in case of No Space on Disk (Disk Error or Video Loss). For icon
types, see "3.2 - Live interface and pop-up menu"
•
Send Email: This can be used to allow the HVR to send an automatic email in case of an event (for more information,
see 3.9.3 - Email).
•
Default: This can be used to restore the default alert settings.
•
Apply to save the changes.
ALARM SCHEDULE
This function can be used to program the alarm output and other alarm notifications (Buzzer, Push, FTP Upload, Cloud
Upload) for each channel.
DS1097-024C
57