BluStream Multicast ACM200 User Manual page 8

Web-GUI Guide
The web-GUI of the ACM allows for full configuration of a new system, as well as ongoing maintenance and control of
an existing system through a web portal.
The ACM can (eventually) be accessed on any internet connected device including: tablets, smart phones and laptops
that are on the same 'Control' network. The ACM is shipped with a static IP address (as below), and is not set with
DHCP enabled.
Sign In / Log In
We would recommend that a computer / laptop is connected directly to the Control port of the ACM for the initial
configuraiton of a new system. As noted previously, the ACM is shipped with a static IP address, not HDCP. There are
instructions of how to amend the static IP address of a computer / laptop towards the rear of this manual.
To log in, open a web browser (i.e. Safari, Firefox, MS Edge etc.) and navigate to the default static IP address of the ACM
which is:
The sign in page is presented on connection to the ACM. The default admin password is:
The ACM requires a new password to be set for the Administrator on first log-in. It is not possible to reset this without
resetting the ACM unit. Please ensure the new password is noted down and kept for future reference. Once the new
password has been created, the ACM will require this once further to log-into the administration menu of the unit.
08
192.168.0.225
www.blustream.co.uk / www.blustream.com.au / www.blustream-us.com
ACM - Multicast Advanced Control Module USER MANUAL
1 2 3 4