BluStream Multicast ACM200 User Manual page 40

ACM - Multicast Advanced Control Module USER MANUAL
Web-GUI - Update Firmware - continued...
On completion of the firmware files being uploaded to the ACM, a notification will appear on screen to feedback the
success of the upload:
To complete the upgrade of the firmware of either the Multicast Transmitter, or for Receiver units, click the buttom
marked 'Update' next to the relevant Transmitter or Receiver. Please note: it is only possible to update Transmitters, or
Receivers at one time. The firmware upgrade process will then begin:
IMPORTANT: Do not disconnect the ACM or TX / RX units whilst in the upgrade process is in progress to avoid firmware
data being lost during transfer to the individual Transmitter / Receiver devices.
Update Password
The Admin password for the ACM can be updated to an alpha-numeric password by inserting the new credentials in
this pop-up menu option. Click 'Update Password' to confirm:
IMPORTANT: Once the Admin password has been changed, it cannot be recovered by the User. If the Admin password
is forgotten or lost, please contact a member of the Blustream Technical Support team who will be able to assist in the
recovery of the Admin rights of the unit. See email addresses below:
contact support@blustream.co.uk / support@blustream.com.au / support@blustream-us.com
40