Table of Contents
Advertisement
Adjusting Your Computer Settings - Enabling TFTP & Telnet
Prior to using the Blustream ACM Firmware update PC program you must activate both TFTP and Telnet features on
your computer. This is achieved using the following steps below:
1.
In Windows, navigate to Start -> Control Panel -> Programs and Features
2.
In the Programs and Features screen, select Turn Windows features on or off in the navigation bar on the left.
3.
Once the Windows Features window populates, scroll down and make sure "TFTP client" and "Telnet
Client" are both selected.
4.
Once the progress bar fills and the pop up disappears, the TFTP client is enabled.
47
ACM - Multicast Advanced Control Module
www.blustream.co.uk / www.blustream.com.au / www.blustream-us.com
USER MANUAL
Advertisement
Table of Contents
Need help?
Do you have a question about the Multicast ACM200 and is the answer not in the manual?