Table of Contents
Advertisement
▪
The unit supports DHD-ECP (DHD-External
Control Protocol) for communication with a DHD
core.
▪
The connection parameters are configured on the
DHD page.
If DHD is enabled, the DHD Set Logic GPIOs are
▪
available.
ACTIVATE DHD SET LOGIC: Activates the DHD
▪
communication protocol.
The unit always tries to connect via the MAIN
▪
connection. While it is not available, the unit
connects via the REDUNDANCY connection.
LAN INTERFACE: Select the IP address of the unit
▪
through which the connection to the DHD core is
made.
TCP/IP ADDRESS: Enter the IP address of the DHD
▪
Core.
DHD (2)
▪
PORT: Enter the port via which the DHD Core can
be reached.
▪
TCP/IP RECONNECT TIME: Specifies the time
interval between TCP connection requests to the
DHD core in seconds. The range is 1 - 255
seconds. (Default: 10 seconds)
Advertisement
Table of Contents
