Table of Contents
Advertisement
▪
On the AOIP (LAN/SIP) page, the SIP accounts are
set if the operating mode is set to AoIP/SIP.
▪
The available channels are shown on tabs.
AC: Codec channel
▪
▪
AUX: Command channel
LABEL: Enter any text. The label is displayed in
▪
the main window of the PC software above the
channel.
ACCOUNT TABLE: Up to five AoIP/SIP accounts
▪
can be assigned to each channel. Incoming calls
are signalled from each account. If there is a
connection on one account, the other accounts
are reply with busy. For outgoing calls, an account
must be selected when dialling.
SIP SERVER: Select one of the predefined SIP
▪
servers. Configure the SIP servers on the LINE
INTERFACE page.
USER NAME: Enter the Username of the SIP
▪
account as specified by the provider.
AoIP (LAN/SIP) (2)
▪
USER AUTHENTICATION: Enter the User
Authentication of the SIP account as specified by
the provider.
▪
PASSWORD: Enter the password for the SIP
account as specified by the provider.
AUDIO UDP PORT: Define the UDP port which the
▪
device uses to send the audio data.
DISPLAY NAME: Enter any text. This text is
▪
displayed at the remote device. (Might be
overwritten by the PBX or the provider.)
SET DEFAULT AUDIO PORTS: Resets the local
▪
audio ports to the default values.
Advertisement
Table of Contents
