AVT MAGIC AC1 Go Configuration Manual page 85

▪ Alarm parameters can be configured on the
ALARM SIGNALLING page.
▪ DECODER IP PACKET LOSS: On the user interface,
under RTP AUDIO QUALITY, the quality of the
received stream is signalled for each codec
channel via an LED.
⬤: Good
▪
⬤: Acceptable
▪
⬤: Poor
▪
In addition, an alarm is set in the event of poor
▪
quality. The threshold values for the individual
levels can be set here.
MEASUREMENT INTERVAL: Sets the measurement
▪
interval for assessing the quality of the stream.
During this period, the lost packets (packet loss) are
counted and the highest jitter value that occurred
is recorded.
BAD: The threshold value for packet loss, above
▪
which the stream quality is classified as poor.
Alarm Signalling (2)
ACCEPTABLE: The threshold values for the packet
▪
loss as well as the maximum jitter value from which
the stream quality is classified as acceptable.
SECURE STREAMING IP PACKET LOSS: A separate
▪
threshold for the alarm can be set for the second
stream when secure streaming is activated:
MEASUREMENT INTERVAL: Sets the measurement
▪
interval for assessing the quality of the stream.
During this period, the lost packets (packet loss) are
counted.
▪ PACKET LOSS: The threshold value for packet loss
above which the stream quality is classified as poor.