AVT MAGIC AC1 Go Configuration Manual page 77

▪ The LAN interfaces of the device are configured
on the LAN INTERFACE page.
▪ DHCP: Enable DHCP if the unit must obtain its IP
address from a DHCP server. The obtained IP
address is displayed on the front display of the
unit by navigating to the home screen and then
pressing the HANG UP key.
A fixed address can be set using the following
▪
fields:
IP ADDRESS
▪
▪ SUBNET MASK
DEFAULT GATEWAY
▪
DNS SERVER: Only available for the primary IP
▪
address. The DNS Server is only required to resolve
the host name of SIP servers. If a SIP server is
specified via the host name, the primary IP address
must be used for AoIP/SIP.
LAN Interface (2)
▪ QUALITY OF SERVICE (DSCP): The device supports
Quality of Service via DSCP (Differentiated
Service Code Point). It uses the Differentiated
Services (DiffServ) field in the IP header. QoS
must be activated in the network. The DiffServ
values of the individual priority levels are defined
and evaluated in the network.
AUDIO: DiffServ value for audio transmission via
▪
AoIP/SIP or IP Leased Line.
▪ SIP: DiffServ value for the AoIP/SIP connection
setup.