Table of Contents
Advertisement
▪
On the LINE INTERFACE setting page, the
operating mode and the connection parameters
are configured.
▪
LINE MODE: Sets the operating mode.
AoIP/SIP
▪
▪
The unit can register with a SIP server. The
connection can be established by calling a phone
number when using a SIP server.
▪
The unit can register with up to five accounts
simultaneously. Incoming calls on any of these SIP
accounts can be accepted. An account must be
selected when dialling out.
▪
By entering the IP address of the receiver, the
connection is established via Direct SIP without the
need for a SIP server.
It is recommended to use an AOIP/SIP provider, or a
▪
self-operated SIP server. Telephony providers usually
don't support high quality audio codecs.
▪
Using an account with telephony providers gives
access to the public telephone network in SD- and
HD-Voice quality.
▪
The IP address of the receiver must be entered when
establishing the connection.
Line Interface (2)
IP Leased Line Dial Up
▪
▪
Bidirectional point-to-point connection
IP address of the receiver is entered when connecting
▪
▪
Compatible with MAGIC ACip3 and Luci Live
▪
IP Leased Line Standard
Bidirectional point-to-point connection
▪
IP address of the receiver is entered in the
▪
configuration
▪
Auto connect after power up
Compatible with MAGIC AC1 XIP and MAGIC ACip3
▪
IP Leased Line Extended
▪
▪
Unidirectional point-to-point connection
IP addresses of the receivers are entered in the
▪
configuration
▪
Auto connect after power up
▪
Independent configuration of the audio decoder
▪
Simulcast streaming to up to 5 decoders
Compatible with MAGIC ACip3
▪
Raw stream compatibility mode available
▪
Advertisement
Table of Contents
