Table of Contents
Advertisement
▪
The detailed codec information can be
permanently displayed on the main panel.
▪
This view is enabled under Menu > Configuration
> Local Settings > Application Parameters >
Show detailed Codec information in Codec
Line
1.
ENCODER / DECODER: Codec information is
shown for encoder and decoder separately.
2.
DETAILS: Shows the following information if
available:
Codec
▪
▪
Algorithm
Sampling rate
▪
▪
Bitrate
Mode (Mono, Stereo)
▪
PAD status and bitrate
▪
▪
Secure Stream mode
Status of stream 1 and stream 2 if Secure
▪
Streaming is enabled.
Main Panel – IP Leased Line (5)
Advertisement
Table of Contents
