Table of Contents
Advertisement
▪
In the AoIP/SIP and IP Leased Line Dial Up
operating mode, the codec used must be selected
with the desired parameters each time a
connection is established.
▪
To simplify the selection when establishing a
connection, the desired codecs must be
preconfigured.
For that, codec, algorithm and other parameters
▪
are configured and stored as a TRANSMISSION
MODE.
Transmission Modes - General (2)
▪
There are three predefined transmission modes
that are always available when dialling out :
TELEPHONE: G.711, 64 kbit/s
▪
7 KHZ: G.722, 64 kbit/s
▪
▪
15 KHZ Default: configurable under Transmission
Modes > 15 kHz Default.
▪
Custom transmission modes can be configured
and stored under Transmission Modes > User
Defined.
Advertisement
Table of Contents
