AVT MAGIC AC1 Go Configuration Manual page 8

▪ Audio transmission via UDP packets using the
RTP protocol
▪ Numbering of the packets for the receiver
Configurable packet size
▪
The packet size is variable if it is not determined
▪
by the codec that is used.
Automatically adapting or fixed decoder buffer
▪
Max. Buffer size: 2 seconds
▪
Mitigation of lost packets by repeating packets on
▪
the receiving side
QoS (DiffServ) function to prioritize audio packets
▪
▪ Remote GPIO: Transmission of GPI states between
AVT audio codecs.
▪ Secure Streaming Function
▪ Sending two streams with identical content
A delay between the streams can be configured
▪
▪ Streams can be sent via separate VLANs
IP Leased Line
▪ IP Leased Line Dial Up
Bidirectional point-to-point connection
▪
IP address of the receiver is entered when
▪
connecting
Compatible with MAGIC ACip3 and Luci Live
▪
▪ IP Leased Line Standard
▪ Bidirectional point-to-point connection
IP address of the receiver is entered in the
▪
configuration
Auto connect after power up
▪
▪ Compatible with MAGIC AC1 XIP and MAGIC ACip3
▪ IP Leased Line Extended
Unidirectional point-to-point connection
▪
IP addresses of the receivers are entered in the
▪
configuration
Auto connect after power up
▪
▪ Independent configuration of the audio decoder
Simulcast streaming to up to 5 decoders
▪
Compatible with MAGIC ACip3
▪
▪ Raw stream compatibility mode available
8