Table of Contents
Advertisement
▪
In the AoIP/SIP operating mode, the codec
channel and AUX channel are displayed in the
main window.
▪
The following information is displayed:
1.
The label of the channel.
2.
SIP account information.
If the channel is connected, the SIP account which
▪
is used for the connection is displayed.
If the channel is disconnected the SIP registration
▪
status off all configured accounts of the channel is
displayed via a status text and the font colour of
that text:
▪
REGISTERED: (green) All SIP accounts are registered.
▪
REGISTERED: (yellow) At least one SIP account could
not register with the SIP server.
INVALID: (red) None of the SIP accounts could register
▪
with the SIP server.
▪
Click on the text to get more information about the
available SIP accounts and their registration status.
In case of registration errors, you can get more
▪
information under System Monitor > SIP Monitor.
Main Panel – AoIP/SIP (2)
3.
Channel Status: Shows the connection status of
the channel in different colours. During a
connection, number, name or IP address of the
remote party is displayed.
Grey: There is no connection.
▪
Green: The connection is established.
▪
4.
Encoder and decoder status.
▪
The audio quality is displayed via a symbol:
HQ: A high-quality codec is used.
▪
HD: The G.722 codec is used.
▪
SD: The G.711 codec is used.
▪
▪
Click on the symbol to get information about
codec
▪
algorithm
▪
▪
data rate
▪
PAD
Secure Streaming
▪
Advertisement
Table of Contents
