AVT MAGIC AC1 Go Configuration Manual page 113

6. More status information:
Status of the Audio Level monitoring which can be
▪
configured on the Alarm Signalling configuration
page.
Status of the PAD monitoring which can be
▪
configured on the Alarm Signalling configuration
page.
Status of the Audio Delay Sync of Encoder and
▪
Decoder. Only available for the Decoder if IP Leased
Line Extended is used.
7. The Level Meters of Encoder on the left and
Decoder on the right show the current audio
level in dBFS. During a connection, the level is
displayed in green.
If there is no connection the Encoder level is
displayed in grey.
8. CONNECT: Press the button to establish the
connection.
Main Panel – IP Leased Line (3)
9. DROP: Press the button to terminate the
connection.