AVT MAGIC AC1 Go Configuration Manual page 67

▪ Settings in the SYSTEM SETTINGS branch cannot
be saved in presets. These settings concern the
hardware or the connection to the direct
environment. Flexible switching via presets
seems therefore less useful.
▪ DISPLAY: The front display of the device is
configured here.
BACKLIGHT: The backlight of the front display can
▪
be operated in two modes:
▪ AUTO: The backlight is switched on when a key is
pressed on the unit. After a few seconds, the
backlight switches off again.
ON: The backlight is permanently on.
▪
CONTRAST: Set the value for the contrast of the
▪
front display so that the display can be read best.
▪ LANGUAGE: The front display of the device
supports two languages.
▪ ENGLISH
GERMAN
▪
General (2)
▪ FRONT KEYPAD: The front panel keyboard is
configured here.
KEY TONE: Activates the key click of the unit
▪
keyboard.
▪ OPTIONS
▪ NEED CONFIRMATION ON MANUAL CONNECTION
DROP: If enabled, the user must confirm a warning
message when he wants to terminate a connection
via the user interface.
NEED USER PASSWORD ON MANUAL CONNECTION
▪
DROP: If enabled, the user must enter the user
password when he wants to terminate a
connection via the user interface. The user
password is set up on the LOGIN configuration
page.
▪ SYSTEM NAME: Enter any text. The system name
is displayed in the user interface or in the MAGIC
System Manager.