Page 4
Features ▪ PhonerSet with MAGIC TH2plus ▪ PhonerSet with MAGIC THipPro Operation of 1 or 2 lines. Operation of up to 10 lines of a studio. ▪ ▪ Up to two PhonerSet phones per device. Switching between studios in the App. ▪...
Grandstream GXV3350 5" touchscreen. ▪ ▪ 1280 x 720 Pretalk per: ▪ ▪ Telephone handset. ▪ Loudspeaker and microphone. ▪ Keypad beneath the screen. Status LED to display: ▪ ▪ Incoming calls. ▪ Active pretalk. ▪ Alarms of the hybrid.
Grandstream GXV3370 7" touchscreen. ▪ ▪ 1024 x 600 Pretalk per: ▪ ▪ Telephone handset. ▪ Speaker and microphone. ▪ The dial pad is permanently displayed on the touchscreen. ▪ Status LED to display : Incoming calls. ▪ Active pretalk. ▪...
Grandstream GXV3380 8" touchscreen. ▪ ▪ 1280 x 800 Pretalk per: ▪ ▪ Telephone handset. ▪ Speaker and microphone. ▪ The dial pad is permanently displayed on the touchscreen. ▪ Status LED to display : Incoming calls. ▪ Active pretalk. ▪...
AVT Wallpaper. ▪ make the PhonerSet App the default phone application. ▪ set the phone to the default configuration. ▪ AVT provides customisation files specific to each device. The files are bundled to an archive ▪ including: ▪ this document ▪...
IP Address First, setup the IP address via the ▪ touchscreen of the telephone. Swipe to the second panel of the home ▪ screen. ▪ Tap SETTINGS. Scroll down to the NETWORK category and ▪ select ETHERNET SETTINGS. ▪ Tap IPV4 SETTINGS on the ETHERNET SETTINGS screen.
Page 11
Web GUI Enter the IP address of the telephone in a ▪ Browser on your PC. The telephone will present a login screen. ▪ The credentials for the first login are: ▪ ▪ USER: admin ▪ PASSWORD GXV3350: The password is printed on the bottom of the phone next to serial number and MAC address.
Default Login The Admin Password must be set to the ▪ default password which is mentioned in the PhonerSet User Manual. Change the password under SYSTEM ▪ SETTINGS – SECURITY SETTINGS – USER INFO MANAGEMENT ▪ Set the password to !admin1...
Grandstream Firmware Version Make sure the telephone runs at least ▪ System Version 1.0.3.30. Go to MAINTENANCE → UPGRADE → ▪ FIRMWARE on the Grandstream Web GUI. Check the CURRENT SYSTEM VERSION ① ▪ in the lower right corner. ② If the system version is lower than 1.0.3.30 ▪...
Page 15
Customisation File ▪ Go to MAINTENANCE → UPGRADE → GUI Customisation File on the Grandstream phone’s Web GUI. ▪ Tap on BROWSE under UPLOAD GUI CUSTOMIZATION FILE and select the file matching the phone: ▪ GXV3350: gxv3350cust GXV3370: gxv3370cust ▪ GXV3380: gxv3380cust ▪...
Page 16
Wallpaper (1) After the reboot most of the app icons on ▪ the home screen should be gone. The AVT wallpaper should be displayed on ▪ the home screen. ▪ If not: Copy the content of the archive that came ▪...
Page 17
Wallpaper.png file. ▪ Select COPY Go to INTERNAL STORAGE – WALLPAPER ▪ Paste the file using the icon in the upper ▪ right corner of the screen. Tap and hold the file AVT PhonerSet ▪ Wallpaper.png. Select SET WALLPAPER. ▪...
Install PhonerSet App (1) Download the latest version of the MAGIC ▪ PhonerSet App from the download section of the AVT website: https://avt-nbg.de/en/downloads/software Copy the MAGIC PhonerSet App to a USB ▪ Flash Drive. Insert the USB Flash Drive into the USB ▪...
Page 19
Install PhonerSet App (2) Allow the installation of an app from a USB ▪ Flash Drive in the settings. To do this, open SETTINGS on the home ▪ screen of the telephone, scroll down to the BASIC category and tap SECURITY SETTINGS.
Page 20
Install PhonerSet App (3) Open the FILE MANAGER from the home ▪ screen of the telephone. Navigate to the MAGIC PhonerSet App on ▪ the USB DRIVE and tap it. ▪ In the confirmation request dialog box, tap INSTALL and wait for the update process to complete.
Page 21
Default Phone Application Set the MAGIC PhonerSet App as default ▪ phone application. Open SETTINGS from the home screen of ▪ the telephone. ▪ Scroll down to the APPS category and select DEFAULT APPLICATION. Tap PHONE APP and select AVT ▪ PHONERSET.
Place all other icons on the second page of ▪ the home screen. Rearrange the Icons if necessary. ▪ Check if the AVT wallpaper is displayed. ▪ Page 1 ▪ Find more information on configuring and operation the PhonerSet app in the Magic Page 2 PhonerSet manual available on our website.