AVT MAGIC AC1 Go Configuration Manual page 106

▪ The detailed codec information can be
permanently displayed on the main panel.
▪ This view is enabled under Menu > Configuration
> Local Settings > Application Parameters >
Show detailed Codec information in Codec
Line
1. CODEC: Codec information shows details of
encoder and decoder combined.
2. DETAILS: Shows the following information if
available:
Codec
▪
▪ Algorithm
Sampling rate
▪
▪ Bitrate
Mode (Mono, Stereo)
▪
PAD status and bitrate
▪
▪ Secure Stream mode
Status of stream 1 and stream 2 if Secure
▪
Streaming is enabled.
Main Panel – AoIP/SIP (5)