AVT MAGIC AC1 Go Configuration Manual page 46

▪ The audio interfaces of the device are assigned to
the codec channel (AC) and the AUX channel on
the AUDIO ASSIGNMENT page.
▪ AC: Select one of the available stereo audio
interfaces.
LOOPBACK AUDIO INPUT TO OUTPUT: Activate
▪
this option to loop the unencoded audio input
signal internally back to the audio output.
AUX: Select one of the available stereo audio
▪
interfaces for the AUX channel. Only the left
channel of that audio interface is used.
The following audio interfaces are available:
▪
OFF: The channel is not used and is not displayed
▪
on the user interface.
AES: AES/EBU stereo interface XLR
▪
▪ ANALOGUE: Analogue stereo interface XLR
AES67 1: Audio over IP stereo interface 1 (optional)
▪
▪ AES67 2: Audio over IP stereo interface 2 (optional)
Audio Assignment (2)
▪ It is not possible to use the analogue audio
interface and the AES/EBU interface at the same
time, as they share the same connectors on the
unit.