▪
IP LEASED LINE EXTENDED: Allows sending of up
to five streams via unidirectional point-to-point
connections. All streams transport identical
content (simulcast).
Reception of one independent stream.
Compatible with MAGIC ACip3
▪
A connection can be established automatically
▪
after power-up or using the Connect buttons.
ENCODER and DECODER are configured on
▪
separate tabs.
▪
COMPATIBILITY MODE: Enable connections to
otherwise incompatible endpoints.
▪
OFF: Use standard mode
AC1 XIP MODNET IP: Compatible with AC1 XIP
▪
Modnet devices in IP mode.
▪
RAW RTP/MPEG: Special application.
Line Interface – IP Leased Line Extended (2)
▪
ENCODER settings
LABEL: Enter any text. The label is displayed in the
▪
main panel of the PC software above the channel.
▪
REMOTE IP ADDRESS: IP address of the remote
device. The encoded data is sent to this address.
▪
AUDIO UDP PORT: UDP port used for sending audio
data.
AUDIO VLAN: Select which VLAN is used for the
▪
audio transmission. The VLAN must be defined
beforehand on the VLAN configuration page.
▪
LAN INTERFACE: Define which IP address of the
device is to be used for the audio transmission.