AVT MAGIC AC1 Go Configuration Manual page 73

▪ RECEPTION: The unit can subscribe to two AES67
streams with up to 8 mono audio channels each.
The desired audio channels of the streams are
then selected under AUDIO INTERFACE. The unit
receives the stream descriptions via SAP of all
streams announced in the network and lists them.
STREAM 1/2: Select one of the listed streams to
▪
subscribe to it.
▪ UPDATE RX STREAMS: The list of detected streams
is rebuilt.
▪ OUTPUT CHANNELS: The channels of the
transmitted stream are permanently assigned to
AES67 audio interfaces.
▪ AES67 1: Channels 1 and 2 of the transmitted AES76
stream are assigned to the audio interface AES67 1.
▪ AES67 2: Channels 3 and 4 of the transmitted
AES76 stream are assigned to the audio interface
AES67 2.
▪ INPUT CHANNELS: Audio channels of received
streams can be freely assigned to the AES67
audio interfaces.
AES67 (4)
▪ QUALITY OF SERVICE (DSCP): The unit supports
Quality of Service via DSCP (Differentiated
Service Code Point). It uses the Differentiated
Services (DiffServ) field in the IP header for this
purpose. QoS must be activated in the network.
The DiffServ values of the individual priority levels
are defined and evaluated in the network.
PTP: Enter the DiffServ value for clock distribution
▪
via PTP here.
▪ RTP: Enter the DiffServ value for AES67 audio
transmission via RTP here.