▪
Passwords can be configured to protect the
configuration of the device from unauthorised
access. These are set on the LOGIN page.
▪
There are two levels of permissions:
ADMINISTRATOR: If an administrator password is
▪
set, the password is required for the following
operations :
Viewing and changing the configuration
▪
Importing configurations
▪
▪
Managing presets
▪
Loading presets
▪
Opening the system panel
Accessing the file system
▪
Updating the firmware
▪
▪
Resetting to factory settings
▪
USER: If a user password is set, the password
allows presets to be loaded.
▪
If only a user password is set, the user password acts
as the administrator password.
Login (2)
▪
Note: To gain access to the configuration without
the password, the unit must be reset to factory
settings via the front display.
▪
Note: The LOCAL SETTINGS are not protected by
these logins, but by the permissions of the
operating system. (See Local Settings > Settings
Folder for further information.)