Table of Contents
Advertisement
▪
DECODER PARAMETERS: In the receiver, the data
packets are buffered to compensate for
transmission jitter (= temporal fluctuations in the
reception of packets).
BUFFER MODE: The receive data buffer offers two
▪
modes.
▪
AUTOMATIC: The device monitors the jitter of the
received data packets and automatically adjusts the
size of the receive data buffer to minimise delay while
avoiding packet loss.
▪
FIXED: The buffer size can be set to a fixed value
under BUFFER SIZE. A larger buffer results in a higher
audio delay.
BUFFER SIZE: Set a receive data buffer size
▪
between 5 ms and 2 s.
Line Interface – IP Leased Line Dial Up (3)
▪
ENCODER PACKET SIZE (PAYLOAD TIME): Some
encoding algorithms do not mandate a specific
size for the IP packets. For the following codecs,
the packet size can be set here in milliseconds.
G.711, G.722, PCM
▪
The device automatically reduces the packet size if
▪
the maximum packet size (MTU) of an Ethernet
frame is exceeded.
Advertisement
Table of Contents
