AVT MAGIC AC1 Go Configuration Manual page 54

▪ The TRANSMISSION MODES - GENERAL page
provides basic settings.
▪ AUDIO MODE AFTER DISCONNECT: Select which
transmission mode is set when a connection is
terminated. This mode is preset the next time a
call is set up. The mode can then be changed.
AUDIO MODE AFTER DISCONNECT: Select which
▪
transmission mode is set when a connection is
terminated. This mode is preset the next time a
call is set up. The mode can then be changed.
AUDIO MODE AFTER POWER UP: Select which
▪
transmission mode is set when the device is
started. This mode is preset the first time a call is
set up. The mode can then be changed.
Transmission Modes - General (3)
▪ DEFAULT MONO MODE (TELEPHONE, 7 KHZ, 15
KHZ): Select how the audio input signal is used
when a standard transmission mode uses a mono
signal:
MONO LEFT: Only the left channel of the input
▪
signal is used.
▪ MONO RIGHT: Only the right channel of the input
signal is used.
▪ MONO (L+R)/2: Left and right channel of the input
signal are mixed.