Panel Mounting - Emerson FBxEdge User Manual

Emerson FBxEdge User Guide
D301913X012
October 2023
Figure A-12. DIN Rail Mounting Options
A.5.3

Panel Mounting

To mount the gateway to a panel, connect the Mounting Plate #R2B00ACCMP01 to the
rear of the gateway:
1. Place the mounting plate on the rear of the gateway.
2. Use a T9 Torx driver to secure the mounting plate with the two provided M3x6 screws,
tightening to 0.6 Nm (do not overtighten).
3. For regular mounting, secure the mounting plate and gateway through the top and
center holes. For more rugged applications, secure the mounting plate with the four
provided M3x6 screws in all four corners of the mounting plate.
A-10 Installing the RXi2-BP Gateway