Emerson FBxEdge User Manual page 47

The Add a connector page displays.
Figure 3-49. Add a Connector Page
3. Scroll down and complete all the fields on this screen:
Field
Name
Hostname
Port
Client ID
Username
Password
QoS
Description
Indicates the name for this connector
Indicates the DNS name for the MQTT host
Indicates the port of the MQTT host.
Note: This is an optional field.
Indicates the unique ID for a client (required by the MQTT
protocol) connecting to an MQTT broker.
Note: The client ID must be unique to each edge device;
no two edge devices can use the same client ID.
Indicates the username for this connector
Indicates the password for this connector
Indicates the QoS attribute
Note: This is an optional field.
Emerson FBxEdge User Guide
D301913X012
October 2023
43