Emerson FBxEdge User Manual page 43

Figure 3-41. Datahub Subscribe node dialog
This subscribes the node to a topic. Usually, this topic corresponds to a tag you have
already configured. To select a pre-configured topic:
1. Click the FBxEdge tab at the top of the screen and select the DeviceHub icon
2. Select a device and then select Tags.
Figure 3-42. Selecting a Topic
3. When the Tags screen displays, click on the copy icon (to the left of the tag lists) to
4. Select the flow-specific tab (at the top of the screen) and complete the Topic field
(which displays all devices).
copy a specific tag to the clipboard. (The system displays a Copied to clipboard
successfully message at the bottom of the screen.)
on the Edit Datahub Subscribe node dialog by pasting in (CTRL+V) the tag.
Emerson FBxEdge User Guide
D301913X012
October 2023
39