Adding An Mqtt Connector (For Sparkplug.b Messages) - Emerson FBxEdge User Manual

Figure 3-54. Modified Dashboard
Note
To configure an inbound topic, select Remote to Local – Inbound as the Data Direction
on the Data Integration page and complete all other fields as necessary.
3.7.2

Adding an MQTT Connector (for Sparkplug.B Messages)

To add an MQTT connector to handle Sparkplug.B messages, define a connector with the
following:
Start the connector name with spb (lower-case)

Ensure that the Hostname, Port, Username, and Password are correct (these provide

data flow connections)
Ensure that the Client ID is unique for the edge device (in accord with MQTT

specifications)
Set the Parallel Publish Count value to 1

Set the Message Throttling value to 0

Ensure that Persistence Storage is not selected

Figure 3-55. MQTT Connector Configured for Sparkplug.B
Emerson FBxEdge User Guide
D301913X012
October 2023
47