Table of Contents
Advertisement
3. Connect the edge device to power.
4. Press the power button (located at the left rear of the RXi2 LP) to boot the edge
device. When the system startup is complete, the device's welcome screen displays.
5. Press F2 to enter the setup.
6. For the initial login, you must select a keyboard layout. Use the up and down arrows
() on your keyboard to select a keyboard layout. The us keyboard is sufficient for
most English keyboards.
Figure 3-2. Edge Device Keyboard Layout Screen
7. Press Enter to select that layout. The login screen displays:
Figure 3-3. Edge Device Login Screen
For the initial login, the credentials are admin and edge.
8. Enter the initial credentials (use the Tab key to move from one field to the next).
9. Tab to Log In and press Enter.
For the initial login when using a static IP address, the License Agreement screen
displays:
Emerson FBxEdge User Guide
D301913X012
October 2023
11
Advertisement
Table of Contents
