Audio Jacks; Coin Cell Battery - Emerson FBxEdge User Manual

Emerson FBxEdge User Guide
D301913X012
October 2023
Pin
13/14
12
2.3.4 Serial Ports
Note
The FBxEdge software does not currently support serial-based communications.
The RXi2-LP provides two serial interfaces, one (1) configured to RS-232 and one (2)
configurable to RS-422 or RS-485 (2W/4W). The connector is a Phoenix Contact 1953745 or
equivalent and mates with a Phoenix Contact 1952296. Two mating plugs are shipped
with the unit. The RS-232 cable can be no longer than 15m. The RX-4xx cable can be more
than 30m, depending on capacitive cable load.
Figure 2-8. Serial Ports
Signal Name RS-232
TXD
RXD
RTS
CTS
GND
Signal Name RS-485
TX+
TX–
RX+
RX–
GND
For RS–422 and RS–485-4-wire modes, connect the corresponding RX+/– signals with the
TX+/– signals and vice versa on the remote device. For RS–485 2-wire mode, connect RX+
6
LED Color LED Status Indicator
Green LINK1000 (steady on)
Yellow
LINK100 (steady on)
Off LINK19
Green
ACT/LINK
Blink with activity
Steady on with no activity at 10/100/100
Pin
1
2
3
4
5
Pin
6
7
8
9
10