Usb3.2 Gen1 And Usb2 Ports - Emerson FBxEdge User Manual

Signal Name
CLK/AUX+
DAT/AUX–
HTPLG
DP_VCC
GND
A.4.3

USB3.2 Gen1 and USB2 Ports

The RXi2-BP provides four USB ports, all using Type A connectors. Two (USB 1 and USB 2,
which support USB 3.2 Gen1) are located on the front of the gateway to the right of the
bank of three Ethernet ports. Two additional ports (USB 3 and USB 4, which support
USB2) are located on the left side of the gateway. Each USB port is protected with an
electrical fuse rated up to 1A. For normal operation, do not exceed 900mA for USB 3.2
Gen1 or 500mA for USB2. Limit the cable length to no more than 3m.
Figure A-7. USB Ports (3.2 and 2)
USB3.2 Signal Name
VCC (5V_SBY)
USB–
USB+
GND
SSRX–
SSRX+
GNC
SSTX–
SSTX+
USB2 Signal Name
VCC (5V_SBY)
USB–
USB+
GND
Installing the RXi2-BP Gateway
Pin
15
17
18
20
2, 5, 8, 11, 26, 19
Pin
1
2
3
4
5
6
7
8
9
Pin
1
2
3
4
Emerson FBxEdge User Guide
D301913X012
October 2023
A-5