Important Notes; D Spurious Signals; D Noise Signals While Charging; D Scanning In The Dualwatch Operation - Icom IC-R15 Basic Manual

■ Important notes

D Spurious signals

You may hear some noises caused by
spurious signals generated in the receiver's
circuit but they do not indicate a receiver
malfunction.

D Noise signals while charging

You may hear some noises caused by
signals generated in the charging circuit.
Be sure to turn OFF the receiver before
charging.
D Scanning in the Dualwatch
operation
The Dualwatch function simultaneously
monitors 2 frequencies.
For example, if you are receiving in the
AM mode on one band and scanning on
the other band, you may hear noise due
to voltage fluctuations when switching
frequencies because the 2 receiving
circuits share the antenna on the IC-R15.
However, this is not a receiver malfunction.

D Time Setting

IC-R15 does not have the function to
automatically set the time. We recommend
you set the time from the SET mode before
operating.
([MENU] > SET > Time Set > Date/Time)
L Set the time even if the battery pack has
been removed for more than a day.
L CS-R15 programming software
(purchase separately) can automatically
set the time.
vii
■ About the IC-R15
manuals
You can use the following manuals to
understand and operate this receiver.
TIP:
You can download each manual and
guide from the Icom website:
https://www.icomjapan.com/support/
Enter "IC-R15" into the Search box on the
site.
To read the manuals
Acrobat Reader is required. If you
® ®
have not installed it, download and install
Adobe Acrobat Reader
® ®
Systems Incorporated's website.
Basic manual (This manual)
Instructions for the basic operations,
precautions and specifications.
Advanced manual (PDF type)
Instructions for the advanced operations,
as shown below.
• Battery operation
• Using a microSD card
• Memory operation
• FM Radio operation
• Scan operation
• Recording the received audio
• Set mode
• Other functions
• Firmware updating
• Options
CI-V Reference Guide (PDF type)
Describes the control commands used
in remote control operation (serial
communication using CI-V).
(As of February 2024)
, Adobe
or Guide
®
from Adobe
®