Scanning Operation - Icom IC-R7000 Instruction Manual

5-5 SCANNING OPERATION
• SIX SCAN FUNCTIONS
(1) PRIORITY SCAN
1) Press the [PRIO-SET] SWITCH.
FM
'''Dnnnn
I
I
_I. U U U. U
M <h
"P" will light up.
2)
Press number keys and
[ENT]
key.
The IC-R7000 comes equipped with six scan functions, providing
tremendous scanning versatility at the touch of just a few switches .
The various IC-R7000 scans and their operations are shown in the
table below.
SCAN TYPE
PRIORITY
SCAN
PROGRAMMED
SCAN
SELECTED
MODE
MEMORY SCAN
SELECTED
MEMORY
SCAN
MEMORY
CHANNEL
SCAN
AUTO-WRITE
MEMORY
SCAN
I
OPERATION
1
Alternately scans a separate frequency set
in the PRIORITY channel while receiving
a frequency displayed on the
F R E-
i
OUENCY DISPLAY.
i
Repeatedly scans between two user-
' - I
PROGRAMMED frequencies in the scan
I
I
range using independent memories for
1
1
! storage of frequency data.
Repeatedly scans all ~emory channels
I
containing frequencies in the same MODE
as the displayed receive frequency.
- - - - - - - - - - - '
i
Scans all specified MEMORY channels
: while skipping unspecified channels and
I
those in blank status.
' Scans all MEMORY channels containing
!
information while skipping memories in
I
1
blank status.
i
Automatically writes a specified fre-
' quency into the AUTO-WRITE ME-
~
MORY channels (80
~
99) while scanning
' frequencies in a programmed scan range.
- - - - - - - - -
- - - - - - - - - '
PRIORITY SCAN allows continuous scanning of a specified fre-
quency while another frequency is being received and displayed,
alternately switching between the two.
1) Press the PR lOR ITY SCAN SET SWITCH to set frequencies in
the PRIORITY channel.
The "P" will light up on the FREQUENCY DISPLAY along with
the frequency number stored in the PRIORITY memory channel.
2) Press the appropriate number keys and [ ENT] key on the KEY-
BOARD to program the desired frequency into the PRIORITY
channel.
Follow the same procedure as specified in SECTION 5-3 FRE-
QUENCY SETTING.
NOTE: Frequencies cannot be entered into the PR lOR ITY
channel via the TUNING CONTROL
-19-