Table of Contents
Advertisement
Installation and storage
WARNING
Transfer
WARNING
This product is packed with the wooden frame. Please ask the special
agency for dismantling it.
Advise the dismantling agent to wear leather gloves and use
appropriate tools such as pinch bar as they have a risk of cutting the
hand by nail or chip.
Give the instruction them further to use the unloading machinery
such as crane to take out the product of the wooded frame, lift it up
with sling belts and transfer it on lifting.
Check sling belts whether it has no error before use.
Only the technically entitled person should be in charge of
conducting the unloading operation and operating the unloading
machinery.
There is a risk that the Pump might drop or lay down when attempted
unreasonable operation or machinery setup was not sufficient. You
are strictly restricted to enter beneath the Pump.
You have a risk of giving damage to your back as the load larger than
safety standard shall be required to transfer the product.
PMB100D ： 26kg
PMB300D ： 51kg
PMB600D ： 82kg
PMB1200D ： 115kg
PMB2400D ： 260kg
Be sure to use the loading machinery (such as mobile crane) to lift up
the Pump or load it on the pallet and fix it and run the Pallet truck for
its transfer.
Never try to enter beneath the Pump unit when lifted it up.
Use sling belts to load/unload the unit.
Do not put the folk of the Fork lift or the like in the Pump bottom
(exhaust outlet) to lift it.
Note to purge the oil to transfer the pump. If forced to transfer
remaining the oil, be sure to keep the pump horizontal.
Do not tilt the pump 10 degree or more while you charge the oil.
The oil might run into the casing.
v
YK11-0016-DI-002-08
Advertisement
Table of Contents
