Delta AH Motion Series Hardware Manual page 74

AH Mo t io n – H ar d war e M a nu a l
 AH20MC-5A
1 20MC 20MC
RUN RUN
2
ERROR ERROR
4
ETH ETH
NET NET
9
STOP
10
11
_3
Number
1 Model name
RUN LED indicator
2
(green)
ERROR LED indicator
3
(red)
Ethernet connection
4
LED indicator (green)
DMCNET connection
LED indicator
5
(green)
6 USB port
7 RUN/STOP switch
8 SD slot
9 Connector
10 DMCNET port
11 Ethernet port
12 Extension port
13 Label
14 Set screw
15 Connector
16 Projection
Dimensions:
3 - 4 2
3
5
12
6
7
RUN
8
Micro SD
Name
Model name of the module
Operating status of the module
ON: The module is running.
OFF: The module stops running.
Error status of the module
Blinking: The module is abnormal.
Status of the Ethernet connection
ON: The Ethernet connection is being connected.
OFF: The Ethernet connection is disconnected.
Status of the DMCNET connection
ON: The DMCNET connection is being connected.
OFF: The DMCNET connection is disconnected.
Providing the mini USB communication interface
RUN: The user program is executed.
STOP: The execution of the user program stops.
Providing the SD interface
Connecting the module and an I/O extension cable.
Providing the DMCNET communication interface
Providing the Ethernet communication interface
For updating the firmware
Nameplate
Fixing the module
Connecting the module and a backplane
Fixing the module
13
15
Description
14
16