Delta AH Motion Series Hardware Manual page 43

Temperature Measurement Modules
Input data registers are automatically assigned to a temperature measurement module through HWCONFIG in
ISPSoft according to the number of registers which is defined for the temperature measurement module. A channel
occupies two words.
Note: The below diagram only shows the list of the modules and is not an actual configuration.
4 input channels. The input device range occupies 8 data registers.
04PT
8 input channels. The input device range occupies 16 data registers
08PTG
4 input channels. The input device range occupies 8 data registers.
04TC
8 input channels. The input device range occupies 16 data registers
08TC
Motion Control Modules
Input/Output data registers are automatically assigned to a motion control module through HWCONFIG in ISPSoft
according to the number of registers which is defined for the motion control module.
Note: The below diagram only shows the list of the modules and is not an actual configuration.
2 input channels. The input device range occupies 14 data registers, and the output device range
02HC
occupies 2 data registers.
4 input channels. The input device range occupies 28 data registers, and the output device range
04HC
occupies 4 data registers.
No input registers and no output registers are assigned to it. Please refer to AH500 Motion Control
05PM
Module Manual for more information about the parameter setting.
No input registers and no output registers are assigned to it. Please refer to AH500 Motion Control
10PM
Module Manual for more information about the parameter setting.
No input registers and no output registers are assigned to it. Please refer to AH500 Motion Control
15PM
Module Manual for more information about the parameter setting.
No input registers and no output registers are assigned to it. Please refer to AH500 Motion Control
20MC
Module Manual for more information about the parameter setting.
Ch a pt er 3 Pr o duc t S pec if ic a t io ns
3_
3 - 1 1