How To Use The Feeder - quadient IS-420 User Manual

Are labels in place in the ALD?
(if you plan to print on tape)
Is there enough ink in the
cartridge?
3
Using the Feeder
The procedure below describes how to place a stack of mail pieces in the Hopper.
Depending on the weighing method you choose to run mail, you may have to insert
the envelopes one by one or place a stack of envelopes in the hopper.

How to Use the Feeder

Feeding a stack of mail pieces:
1. Fan the envelopes to separate them.
2. Bevel the edge of the stack.
3. Place the envelopes in the hopper, their upper edge resting against the rear guide.
4. Adjust the side guide for large envelopes. To adjust the guide, push it gently to
rest against the envelopes, without pressing.
36
See How to Fill the Automatic Label Dispenser
page 65.
To display the level of ink in the printing headset,
see How to Display Ink Level and Cartridge Data
on page 180.
You can be warned when the available credit gets below a preset
value (see How to Set the Low-Credit Threshold
on
on page 145).