Quectel SG368Z Series Hardware Design page 114

V max
I
V min
I
V max
OH
V min
OH
V max
OL
V min
OL
VSWR
WCDMA
WLAN
WWAN
Modifications:
Any changes or modifications not expressly approved by Quectel or the party responsible for
compliance could void the user's authority to operate the equipment and invalidate the regulatory
approval.
Host manufacturer must follow KDB Publication 996369 D04 Modulen Integration Guide.
Host manufacturer is responsible for regression tests to show compliance to the applicable standards
due to the following actions:
1.any modification done to the module.
2.Integration of the module into a host device
Host product manufacturer is responsible for compliance to any other FCC rules that apply to the host
not covered by the modular transmitter grant of certification.
Final host product is required to show compliance to Part 15 Subpart B with the modular transmitter
installed
Product Marketing Name：Quectel SG368Z-WF
FCC Certification Requirements.
According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a
mobile device.
And the following conditions must be met:
1. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna
installation and operating configurations of this transmitter, including any applicable source-based
timeaveraging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion
Requirements of 2.1091.
2. The EUT is a mobile device; maintain at least a 20 cm separation between the EUT and the user's
body and must not transmit simultaneously with any other antenna or transmitter.
SG368Z_Series_Hardware_Design
Absolute Maximum Input Voltage
Absolute Minimum Input Voltage
Maximum High-level Output Voltage
Minimum High-level Output Voltage
Maximum Low-level Output Voltage
Minimum Low-level Output Voltage
Voltage Standing Wave Ratio
Wideband Code Division Multiple Access
Wireless Local Area Network
Wireless Wide Area Network
Smart Module Series
113 / 113