Disassembly Of Gear Case - TOHATSU MFS 4 Service Manual

Lower Unit

23) Disassembly of Gear Case

Check bearings 1 for cracks and generation of abnormal
1.
noise. Replace if necessary.
Do not reuse removed bearing.
· Do not remove bearing unless it is replaced
with new one.
· Before removing, check bearing for play or
deflection. Replace if necessary.
Remove bearing 1 by using commercially available bearing
2.
puller.
Remove bearing 2.
3.
Bearing Press 3 :
P/N. 3H6-72769-0
Bearing Press Collar 4 :
P/N. 3H6-72768-0
Center Plate 3 5 :
P/N. 3AB-99701-0
Driver Rod 3 6 :
P/N. 3AB-99702-0
Needle bearing press Ass'y 7 :
P/N. 369-72900-0
6-18
CAUTION
1
1
Do not reuse.
3
2
2
Do not reuse.
3
2
6
5
3
4
2
7
2
4st 4/5/6 2011