Table of Contents
Advertisement
12. OPERATION OF EACH SPECIAL MODULE MONITOR SCREEN
12.26.4 Monitoring graphs
1)
4)
No.
The current I/O value, a value between 0 to 1000 or 0 to 2000 for the digital I/O value
1)
of the various channels, is displayed as a percentage ranging from 0 to 100%.
2)
The temperature detection values for the various channels are displayed.
3)
The module codes for installed modules for the various channels are displayed.
The specified effective/invalid status for the analog output enable signal for each of
the channels is displayed.
0: Effective
4)
The specified status for the output enable command of each of the channels is
displayed.
0: The offset value is output as an analog value.
1: The analog value following D/A conversion is output.
A "!" is displayed when a watchdog timer error occurs.
9)
A "!" is displayed when an error occurs in a module on the various channels.
Contents of display
1: Invalid
12 - 110
GOT
MELSEC
2)
Buffer memory address
to reference (decimal)
10 to 13
18 to 21
28 to 31
27
3)
5)
Advertisement
Table of Contents
