Tc Monitor Screen Display And Key Functions - Mitsubishi Electric GOT-A900 Series Operating Manual

9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS

9.4.2 TC Monitor screen display and key functions

2)
3)
In this section, the TC Monitor screen display contents and the function of keys
displayed at the top of the screen are explained.
(1) Display
TEST MENU FORM SET
TC MONITOR
NETWK No.[ 0] STATION[33]
FILE [ABCDEF.PRG]
T 0 PV 0
[Production line A]
T 1 PV 0
[Production line B]
T 2 PV 150
[Production line C]
T 3 PV 0
[Production line D]
Displays the keys that are used with the operation of the TC Monitor screen
1)
shown in (2) (Touch input).
Displays the monitor station network No. and station No.
2) When connected to QnACPU, the execution file name is displayed (If there
are more than one file, the first file name is displayed.).
Displays the current value, set value, contact point and coil status of the
3) monitor device (The screen above shows when the monitor module is 16
bits.).
(2) Key functions
The chart below shows the function of the keys that are used with the operation of
the TC Monitor screen.
Key
Move to basic screen (function change menu screen) for changing to
MENU
another monitor function or ending the system monitor (See Sec.
9.1.1.).
Move to display change menu screen for changing the numerical
FORM
display on the TC monitor screen (decimal/hexadecimal) or changing
the comment display (on/off) (See Sec. 9.1.2.).
Move to device setting menu screen to change the monitor device or
execute a test.
SET
• Change of monitor device (See Sec. 9.1.3)
• Test (See Sec. 9.6.)
Scroll the display contents up or down one line to display the monitor
device that is not displayed (just before or after the current display).
Operation is enabled when monitor device comment is displayed.
: Scrolls down one line.
: Scrolls up one line.
SV 0
SV 0
SV 150
SV 0
9 - 13
MELSEC
1)
When comment is not displayed: max. 8 devices
When comment is displayed
Display when system monitoring
T/C current value, set value
(Contact point, coil)
Function
GOT
: max. 4 devices
: ON
: OFF