Selection And Operation Of Mode - Mitsubishi Electric GOT-A900 Series Operating Manual

19. OPERATION PROCEDURES FOR THE LIST EDITOR FUNCTION

19.2.2 Selection and operation of mode

After the keyword input, select the mode in the list editor function for operations in
Chapter 20.
(1) Selection and change of mode with mode key
Select the mode with the mode key (Refer to 3.5.5.) so that operation
corresponding to the mode in Chapter 20 may be performed.
The mode can be freely changed when operations in Chapter 20 are performed.
Various operations can be continued while changing modes. *1
READ ------------------- Read mode
WRITE ------------------- Write mode
INSERT ------------------- Insert mode
DELETE ------------------- Delete mode
PARAM ------------------- Parameter mode
OTHER ------------------- Other mode
*1 Mode key input is always valid.
Input of the mode key clears the input data except for the step numbers. The
display returns to the initial status of the mode selection.
(2) Operation in each mode
The mode selected in (1) allows for operation corresponding to the mode in
Chapter 20. Operation procedures of each mode are described in Chapter 20.
Operate the GOT according to the description.
If an error message appears during operation, take action according to Chapter 21.
19 - 5
GOT
MELSEC