17. USING THE NETWORK MONITOR SCREENS
17.3.4 Display contents and keys functions: other station parameter status monitor
This section describes the other station parameter status monitor screen and the
function of on-screen keys.
(1) Display contents
When the A985/97*/960GOT is used
2)
No.
1)
Station numbers are shown up to the maximum number of linked stations.
2)
Any station whose parameters are monitored is highlighted on-screen. *
3)
Any station that stays in an abnormal condition is highlighted on-screen.
A station specified as a reserved station is treated as a station that stays in a
4)
normal condition.
* Not highlighted when connected to a MELSECNET/B or MELSECNET (II) master
station.
(2) Key Functions
The table below shows the function of keys that are used on the other station
parameter status monitor screen.
Key
RET
Returns to the own station monitor screen.
Exits the other station parameter status monitor screen and returns to
END
the previous monitor screen where the network monitor function was
executed.
Contents of Display
Function
17 - 14
MELSEC
When the A95*GOT is used
The display details are the same
as the ones on the A985/97*
3)
/960GOT.
(Display example)
4)
1)
GOT