Entry Monitor; Basic Operation - Mitsubishi Electric GOT-A900 Series Operating Manual

9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS

9.2 Entry monitor

9.2.1 Basic operation

[Operation procedure]
Select "Device Monitor" with the basic screen.
PRESS "SET" KEY, SELECT
ITEM THEN ENTER DEVICE
TYPE & NO.
(*2)
Enter the monitor device.
When entry is complete, display the Device
Monitor screen.
DEVICE MONITOR TEST MENU FORM
NETWK NO.[ 0]
D 15
D 10
X 001
M 25
Y 70
W 200
R 50
D 0
Change the screen display.
Enter the device to be monitored in advance. The function that monitors only the
device that was entered is called the "entry monitor".
The entry monitor operation when executing the system monitor function is explained
below.
The entry monitor operation procedure is shown below.
TEST MENU FORM SET
(*1)
SET
STATION[FF]
-2147483648 DW
-32767
!
"
!
43
68378428 DW
3
See Sec. 9.1.1.
......When a screen other than the basic screen is displayed,
touch MENU at the top of the currently displayed screen,
display the basic screen, and select Device Monitor.
......When you touch MENU , you return to the basic screen.
When you touch FORM , you can change this display
(See Sec. 9.1.2.).
When you touch SET , you can specify the monitor
station and device (See Sec. 9.1.3.).
......Set the station and device to be monitored.
For the setting method, see Sec. 9.1.3.
*1 Monitor device entry is in station modules.
If you change the station for the monitor device, all
monitor devices entered before that are invalid.
*2 A maximum of 8 entry devices can be entered.
To enter more than 8, delete in order from the old entry
device. The 8 most recent entry device will be
monitored.
As needed, re-enter after deleting the entry device.
(For the method of deletion, see Sec. 9.2.3.)
......Do if needed.
For the display change method, see Sec. 9.1.2.
9 - 7
GOT
MELSEC