Batch Monitor; Basic Operation - Mitsubishi Electric GOT-A900 Series Operating Manual

9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS

9.3 Batch monitor

9.3.1 Basic operation

[Operation procedure]
Select "Batch Monitor" with the basic screen.
NETWK No.[ 0]
PRESS "SET" KEY, SELECT
ITEM THEN ENTER DEVICE
TYPE & NO.
Specify the first monitor device.
When reading is complete, display the Batch
Monitor screen.
BATCH MONITOR TEST MENU FORM SET
NETWK No.[ 0]
D 10 32767
D 11
D 12
D 13
D 14
D 15
D 16
D 17
Change the screen display.
When monitoring, the function of specifying the device at the beginning of an optional
device range and monitoring it is called the "batch monitor".
The batch monitor operation when executing the system monitor is explained below.
The batch operation procedure is shown below.
TEST MENU FORM SET
STATION[FF]
STATION[FF]
D 18 -500
0 D 19 3234
0 D 20 0
-1 D 21 0
0 D 22 0
3 D 23 -32768
0 D 24 0
0 D 25 0
See Sec. 9.1.1.
......When a screen other than the basic screen is displayed,
touch MENU at the top of the currently displayed screen,
display the basic screen, and select "Batch monitor".
......When you touch MENU , you return to the basic screen.
When you touch FORM , you can change this display
(See Sec. 9.1.2.).
When you touch SET , the monitor station and device
can be specified (See Sec. 9.1.3.)
(1) Specify the station and device to be monitored.
For the method of specifying, see Sec. 9.1.3.
......Do if needed.
For the display change method, see Sec. 9.1.2.
9 - 10
GOT
MELSEC