Mitsubishi Electric GOT-A900 Series Operating Manual page 79

6. OPERATING THE VARIOUS LADDER MONITOR SCREENS
[Operation procedure]
To the following page
(2) When the MELSEC-QnA ladder monitor is executed
1) Touch the ladder monitor starting touch switch on the monitor
screen prepared by the user or touch the LADDER MON. on the
utility screen to start the ladder monitor function.
POINT
If ROM_BIOS is not installed, an error message is
displayed. Touch the END button and install the
ROM_BIOS (H version or later).
2) The key window is displayed. Set the network No./station No. of
the applicable PLC CPU with the following keys.
Alphanumeric
AC
DEL
POINT
Designate the network No. and the station No. of the
applicable PLC CPU.
(For CC-Link system)
Network No. : 0
Station No.
(For network system)
Network No. : 1 to 255 (self-loop)
Station No.
3) The PLC read screen appears.
First, touch the Set Up key to display the setting window.
: Select the input area.
: Input the network No. and the station No.
: Clear all input data to the applicable area.
: Clear one character at the cursor position.
: Define the input.
: 0 (mask station)
: 1 to 64 (control station)
1 to 64 (normal station)
6 - 4
GOT
MELSEC