Table of Contents
Advertisement
12. OPERATION OF EACH SPECIAL MODULE MONITOR SCREEN
12.9.2 Simple loop monitor
1)
2)
3)
No.
The specified simple loop control execution enabled/disabled status is
1)
displayed.
2)
The control mode set status is displayed.
3)
The set value of the simple loop control constant is displayed.
The set values of channel 1 coordinates that were set in each point are
4)
displayed.
The set values of channel 3 coordinates that were set in each point are
5)
displayed.
The number of coordinate points of the simple loop control that was set is
6)
displayed.
7)
The error code is displayed when a writing data error occurs.
8)
The set resolution selection is displayed.
7)
Contents of display
12 - 22
4)
8)
Buffer memory address
GOT
MELSEC
5)
to reference (decimal)
6
7, 8, 9
18 to 37
17
16
14
6)
Advertisement
Table of Contents
