Mitsubishi Electric GOT-A900 Series Operating Manual page 212

12. OPERATION OF EACH SPECIAL MODULE MONITOR SCREEN
1)
2)
3)
4)
5)
6)
No.
The time from when the proximity dog goes ON to when the
1)
origin point return is completed is displayed. (for stopper stop 1)
The restriction value used to limit the torque of the servomotor
2)
after reaching the creeping speed is displayed.
The amount of movement after the proximity dog goes ON is
3)
displayed. (for count equation)
The display shows which acceleration time, 0 to 3 (basically, this
4) is set using the detailed parameters) is to be used as the
acceleration time when making an origin point return.
The display shows which deceleration time, 0 to 3 (basically, this
5) is set using the detailed parameters) is to be used as the
deceleration time when making an origin point return.
The shift amount (amount of movement) for an origin point shift
6)
is displayed.
(2) Detailed parameters for origin return
Contents of display
12 - 87
MELSEC
Buffer memory address
to reference (decimal)
Axis 1 Axis 2
79 229
86 236
80 230
81 231
82 232
83 233
84 234
85 235
GOT
Axis 3
379
386
380
381
382
383
384
385