7700 MultiFrame Manual
7705OE-HD HDTV Optical to Electrical Converter, 19.4Mb/s to 1.5Gb/s
2.1.
CARE AND HANDLING OF OPTICAL FIBER
2.1.1. Safety
Never look directly into an optical fiber. Non-reversible damage to the eye can
occur in a matter of milliseconds.
The laser modules used in the Evertz fiber optic modules are Class I, with a maximum output power of
2mW, and wavelengths of 1310nm or from either 1270nm to 1610nm.
2.1.2. Handling And Connecting Fibers
Never touch the end face of an optical fiber.
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore
care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending.
recommends that you maintain a minimum bending radius of 3 cm to avoid fiber-bending loss that will
decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with
cable lockout devices, to prevent the user from damaging the fiber by installing a module into a slot in the
frame that does not have a suitable I/O module. For further information about care and handling of fiber
optic cable see section 3 of the Fiber Optics System Design chapter of this manual.
7705OE-HD - 4
Revision 1.6
Evertz