Dot-Matrix Display; Figure 4-2: 7707Oe-3G-1 Card-Edge Menu Quick Reference - evertz 7700 Multiframe Manual

3g/hd/sdi re-clocking optical to electrical converter
Hide thumbs Also See for 7700 Multiframe:
Table of Contents

Advertisement

4.2.

DOT-MATRIX DISPLAY

Additional monitoring and control functions are implemented via the 4-digit dot-matrix display and controls
located at the card-edge. The card-edge pushbutton and toggle-switch are used to navigate through the
display menu. Figure 4-2 provides a quick reference to the display menu structure.
Pressing the pushbutton advances the display to the next menu level. The toggle-switch may then be used
to move up or down through selections of that menu level. Select BACK to return to the previous menu
level.
If a specific menu selection has a configuration value associated with it, then this may be changed using
the toggle switch. Pressing the pushbutton will apply the displayed value and return the user to the
previous menu level.
The most recent user selection will be maintained in non-volatile memory in the event
of power loss to the module.
Toggle
Switch

Figure 4-2: 7707OE-3G-1 Card-edge Menu Quick Reference

7707OE-3G-1 3G/HD/SDI Re-Clocking Optical to Electrical Converter
Menu Level 1
Menu Level 2
Indications
LOS (Video Loss)
Supersedes
OK (Okay)
Selections
Selections
RATE (Signal Rate)
STAT (Status)
PWR (Optical Power)
VER (Software Version)
BACK (Abort)
Selections
RATE (Signal Rate)
GPO (GPO Triggers)
CTRL (Control)
DISP (Display Orientation)
FRST(Factory Reset)
BACK (Abort)
Pushbutton
Menu Level 3
Indications
2970 (2970Mbps Rate)
1485 (1495Mbps Rate)
270 (270Mbps Rate)
BYP (Reclocker Bypass)
LOS (Loss of Signal)
Indications
0 to -40 (dBm)
OVER (Over Power)
LOW (Low Power)
Indications
Software Version
Indications
AUTO (Auto Rate / Bypass)
2970 (2970Mbps Rate)
1485 (1495Mbps Rate)
270 (270Mbps Rate)
BYP (Reclocker Bypass)
Selections
LOS (Loss of Fiber Signal)
Selections
POL (GPO Polarity)
Selections
HORZ (Horizontal)
VERT (Vertical)
Selections
NO (Abort)
YES (Accept)
Revision 1.0
7700 MultiFrame Manual
Menu Level 4
Selections
EN (Enable Trigger)
DIS (Disable Trigger)
Selections
OPEN (Normally Open)
CLOS (Normally Closed)
Page-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

7707oe-3g-1

Table of Contents